Product Overview

The Stihl TSA 300 Cordless Cut-off Saw AP System Bundle (Complete with AP500 Battery & Charger) is a 12” (300 mm) battery-powered cut-off machine in the STIHL AP System. It’s exceptionally easy to handle thanks to its compact and well-balanced design and is designed for professionals working in construction, hardscaping and pipework – making it an ideal choice for processing materials such as bricks, paving stones, natural stone, concrete, reinforced concrete and rebar. The bundle comes complete with the Stihl AL 500 Hi-Speed Charger, a Stihl AP 500 S Battery and a Diatech F2 Multi Materials Diamond Blade (300/20).

Fitted as standard with a K-ME abrasive cutting wheel (not pictured), the TSA 300 has cutting performance that is comparable to the TS 410 petrol cut-off machine because of the narrow cutting kerf. This is achieved thanks to the lack of engine vibrations. It increases precision when making cuts, meaning you can achieve accurate results at all times and allows for a maximum cutting depth of 4.3″ (110 mm).

As the TSA 300 is battery-powered, it has low noise emissions during cutting. It is fitted with a powerful EC motor which operates almost wear-free, is quiet and has smooth running and low vibrations – it also ensures the tool operates at optimum performance throughout the entire battery charge. Fitted with a STIHL magnetic filter which passes cooling air through several magnets, protecting the internal components from metal dust and particles. These magnets can be easily removed for fast cleaning, ensuring a long-service life.

This tool is fitted with a fast-stop brake that recuperates energy into the battery. After releasing the trigger, the wheel is stationary in less than 4 seconds which loads the energy from the TSA 300 back into the battery, which increases your working time. As the TSA 300 is battery-powered and has zero emissions, it can also be used indoors. It also has a LED display on the handle which provides you with information such as operating speed and an overheating warning.

The TSA 300 must be used with the AP 500 S battery for maximum performance. If you use an AP 200 S or AP 300 S, there will be a reduction in performance. On a full charge with the AP 500 S, the TSA 300 has a working time of 20 minutes.

About the Diatech F2 Multi-Materials Blade

The F2 Multi Materials blade’s 22 castellated 15mm segments, enable the blade to master the hugely varied range of materials found on UK construction sites. The centre plate is pitted with cooling holes to allow consistent sawing capabilities. This multi materials cutting disk can cut engineering brick, reinforced concrete and blocks, paviors, abrasive materials, sandstone, asphalt and tar.

About the STIHL AL 500 Hi-Speed Charger

230 V hi-speed quick charger, recommended for STIHL AP System batteries (can also be used with AK System batteries). With operating mode indicator and active battery cooling. Cable tie with Velcro strap. The charger can be wall mounted if required.

Full information available here.

About the STIHL AP 500 S Battery

High capacity 36 V, 8.8 Ah Lithium-Ion battery, the Stihl AP 500 S Battery is the most powerful AP battery from STIHL. Featuring power laminate technology which means it has double the number of charging cycles of a typical STIHL AP system battery with cylindrical cells.

Full information available here.